Skip to main content
  • Made in our UK factory

IML vs Screen Printing: Which Print Lasts on Reusable Cups?

Four ways to put a logo on a plastic cup, and only one of them was built for a glasswasher. Here’s how they compare, from the factory that prints cups every day.

9 min read

Two reusable pint cups with full colour wrap-around IML print on a picnic table

In short

  • IML (In Mould Labelling) makes the printed label part of the cup wall, so the design can’t scratch, peel or wash off.
  • Screen printing lays ink on the outside of a finished cup, one colour per screen, and suits simple one or two colour logos.
  • For full colour, photographs or a design that wraps around the cup, IML wins: it covers about 95% of the cup with no extra cost per colour.
  • For reusable cups that go through a commercial dishwasher again and again, IML is the durable choice. Ours are built for 200+ commercial dishwasher cycles.
  • Pad and digital printing fill niche jobs (small areas, short personalised runs) but share screen printing’s weak spot: the ink sits on the surface.

IML vs screen printing comes down to where the ink lives. With in mould labelling, your design is part of the cup. With screen printing, it is painted on afterwards. On a cup that will be washed, stacked and refilled hundreds of times, that one difference decides how your brand looks at the tenth event.

We make reusable cups and print them in house at our factory in Stockton-on-Tees, and IML is the only decoration we use. That’s a choice, not a limitation, and this guide explains why. We’ll also be fair to the other methods: screen, pad and digital printing all have jobs they do well, and if one of them suits your order better, you should know.

What is IML printing?

IML (In Mould Labelling) is a decoration method where a printed label is placed in the tool before the cup is made, so the plastic and the label form one piece. The label is printed first, in full colour or a single colour, then the cup forms around it. Nothing is stuck on and nothing is painted on.

Because the label sits flush in the cup wall, the artwork is protected by the surface of the cup itself. That’s why IML cups keep their colour through the glasswasher, and why a design that looked sharp on day one still looks sharp after a festival season.

On our cups, full colour IML wraps round about 95% of the cup in a 360° design, leaving room for the legal measure markings on our UKCA certified cups. Single colour IML uses exactly the same process with one ink, and it’s our lowest printed price. You can see both on our IML cup printing page.

What is screen printing on cups?

Screen printing pushes ink through a fine mesh stencil onto the outside of a cup that has already been made. Each colour needs its own screen and its own pass, so a three colour logo is three separate prints lined up on top of each other.

It’s a long-established method and it does a good job on bold, flat artwork: a one colour wordmark, a simple crest, a date. Where it struggles is detail. Photographs, gradients and soft shading have to be broken down into dots or separate layers, and the more colours you add, the more screens, setups and chances of misalignment you introduce.

The bigger issue for reusable cups is durability. Screen ink sits on the surface, so every wash, every stack and every knock against a bar top is a little bit of wear on the print itself.

IML vs screen printing: the side-by-side comparison

Here’s how the four common methods for decorating plastic cups compare on the things buyers ask us about most.

MethodWhere the print sitsColours and detailPrint areaRepeated washing
IML (in mould labelling)Part of the cup wallFull colour, photographs and gradients, or single colour360° wrap, about 95% of the cupBuilt for 200+ commercial dishwasher cycles
Screen printingInk on the outer surfaceFlat spot colours, one screen per colourUsually one or two panelsSurface ink wears over time
Pad printingInk on the outer surfaceSmall, simple marks in few coloursSmall logo areaSurface ink wears over time
Digital (UV) printingInk cured on the outer surfaceFull colour, suited to short personalised runsVaries by machineSurface ink, durability varies

The pattern is clear. Three of the four methods put ink on top of the cup. IML is the one that makes the design part of it, which is exactly what matters when the cup will be reused rather than thrown away.

Which lasts longer in the dishwasher?

IML lasts longer, because there is no surface ink for the water, detergent and heat to attack. A commercial glasswasher runs hotter and harder than a home dishwasher, and it does it every night of a festival or every service at a busy venue. Surface prints tend to fade, dull or scratch first where hands grip the cup and where cups rub together in a stack.

Our printed cups are made from BPA free polypropylene and built for 200+ commercial dishwasher cycles, and the design is designed to keep its colour for the life of the cup. If a cup is going to be part of a deposit scheme or a stock of bar cups, that durability is the whole point of buying reusable. Our guide to how long reusable plastic cups last goes into more detail.

Screen printing vs digital printing: where do they fit?

Screen printing is better for bold, simple artwork in larger runs; digital printing is better for short runs and one-off personalisation in full colour. Both put ink on the cup’s surface, so neither matches IML for long-term durability on a reusable cup.

Digital printing earns its place when every cup needs to be different, such as individual names, or when only a handful are needed. Pad printing is mainly used for small marks on curved or awkward surfaces. If your cups are going to be used once, or as gifts that won’t see a commercial dishwasher, any of these can work. If they’re going behind a bar, we’d steer you to IML.

Which print method suits which order?

Use this as a quick guide to matching the method to what you’re ordering.

Your orderBest methodWhy
Festival or event cups with full artworkFull colour IMLPhotographs, line-ups and sponsor logos in one 360° wrap that survives every wash
Pub, club or brewery logoSingle colour IMLThe lowest printed price with the same durability as full colour
Deposit scheme or bar stockIMLCups are washed hundreds of times, so the print has to be part of the cup
Wedding or party, cups kept as keepsakesFull colour IMLNames, dates and photos stay sharp when guests take them home and keep using them
Every cup a different name, tiny quantityDigital print (market option)Suits one-off personalisation where durability matters less
Single-use promotional cupsScreen or flexo print (market option)The print only has to last one drink

For most of the orders we see, from printed pint cups for a bar to stackable wine cups for a wedding, IML is the right answer. You can browse every printed cup on our printed cups page.

How does the cost compare at 50 cups and 5,000 cups?

With IML, the price per cup depends on the cup, the quantity and whether you choose full or single colour, not on how many colours are in your design. A design with twelve colours costs the same to print in full colour IML as a design with three. Screen printing works the other way: each extra colour adds a screen and a pass, so detailed artwork pushes the price up.

At small quantities, the thing that matters most is setup. Our printed cups start at 50 per design, the digital proof is free, and there’s no extra charge per colour on full colour IML. At larger quantities, the price per cup drops as you order more, and our Eco Saver service (25 working days) gives our best price for anyone who can plan ahead. Live prices for every cup and quantity are on each product page, and our lead times and pricing page explains how the services compare.

If you’ve had a lower quote for comparable cups, send it over. We’ll beat a qualifying like-for-like quote under our Price Promise.

What artwork works best for IML?

Almost anything works with full colour IML, because it prints photographs, gradients and fine detail as easily as a flat logo. The best results come from vector artwork (PDF, AI, EPS or SVG) or high resolution images, set up on our cup templates so nothing important falls on the seam or the measure markings.

  • Download a template for your cup from our artwork templates page.
  • Use the whole wrap. A design that runs right round the cup makes the most of the 95% print area.
  • Keep small text readable. Leave room around legal markings on pints, halves and 2 Pints.
  • No artwork yet? Our design service will create it for £35 + VAT per design.

Every order gets a free digital proof before production, so you see your design on the cup first. For more ideas, read our guide to how to brand cups for events or our festival cup design guide.

Why we only use IML

We print every cup with IML because reusable cups are bought to be used again, and the print should last as long as the cup. A cup that keeps its colour keeps your brand in front of people at every refill, every event and every time it comes out of the cupboard at home.

Making and printing in one factory also keeps things simple. Standard orders take 10 working days from proof approval and payment, Eco Saver takes 25, and plain cups are dispatched in 3 working days. There’s no finished cup arriving from somewhere else to be printed, and you deal with the people who make it. Whether you need printed half pint cups, Stack Cups™ or reusable hot drinks cups, the print process is the same.

Frequently asked questions

Straight answers from the factory.

Still have questions? Get in touch with our team

Get in touch with our team
  1. In mould labelling (IML) prints your design onto a label that becomes part of the cup wall as the cup is made, so the artwork sits inside the plastic surface rather than on it. Screen printing pushes ink through a mesh onto a finished cup, one colour at a time, so the print sits on the outside. IML handles full colour photographs and wraps around about 95% of the cup; screen printing suits one or two flat colours on a smaller area.

  2. IML stands for In Mould Labelling, sometimes written in-mould labelling. A printed polypropylene label is placed in the tool, and the cup forms around it, so the label and cup become one piece.

  3. No. Because the label is part of the cup wall, there is no exposed ink to wear away. Our IML cups are built for 200+ commercial dishwasher cycles, which is why we use IML for every printed cup we make.

  4. For one simple colour on a small run it can look cheaper per cup, but each extra colour usually means another screen and another pass. Full colour IML costs the same whatever the number of colours in your design. Single colour IML is our lowest printed price, so compare like-for-like quotes for your quantity before deciding.

  5. Yes, with full colour IML. Photographs, gradients and fine detail print at full colour across a 360° wrap. Screen printing struggles with photographic images because it builds colours from separate flat layers.

  6. Our printed cups start at 50 cups per design, with a free digital proof before production. Standard orders take 10 working days from proof approval and payment, or 25 working days on Eco Saver for our best price.

  7. Thin single-use cups are usually screen or flexo printed because the print only has to survive one drink. For reusable cups that go through a glasswasher again and again, IML is the stronger choice because the design can't scratch or wash away.

Get a price for IML printed cups

Choose your cups, quantity and date to see your price, with a free proof before production.

1. Build Your Order

Auto-Selected Tier

Select a date to calculate

Popular Festival Cups

Pint to Line (Full Colour)

Pint to Line (Full Colour)

From £0.55 ex VAT

Min: 50

2 PINT (Full Colour)

2 PINT (Full Colour)

From £0.80 ex VAT

Min: 50

Half Pint (Full Colour)

Half Pint (Full Colour)

From £0.43 ex VAT

Min: 50

2. Contact Information

3. Your Message

Set artwork (upload your files or add our design service) on each product above when you add it to your quote.