Skip to main content
  • Made in our UK factory

Is Polypropylene Safe for Drinking Cups? BPA, Hot Drinks, Dishwashers and PP5 Recycling

What PP5 means, why your cup is BPA free, what it can handle and what happens at the end of its life. Straight answers from the factory that makes our cups.

8 min read
A full colour printed reusable polypropylene cup holding an iced drink in front of an outdoor music stage

In short

  • Yes, polypropylene is safe for drinking cups. It's one of the most widely used plastics for food and drink contact.
  • PP5 is simply the recycling code for polypropylene: the number 5 in the triangle.
  • It's BPA free by nature. BPA is used to make polycarbonate, not polypropylene.
  • Our cups are dishwasher safe for 200+ commercial cycles, and our Hot Drinks Cup is made for tea and coffee.
  • Recyclable where facilities accept polypropylene, but reuse comes first.

Is polypropylene safe? Yes. Polypropylene, the plastic marked PP or 5, is one of the most widely used materials for food and drink contact, and it's BPA free by nature. It's what we make every Drinksmate reusable cup from, at our factory in Stockton-on-Tees.

We get asked about the plastic more than almost anything else, usually by someone about to put a few thousand cups in front of a crowd, or in their own kitchen. This guide answers the questions people actually search for, in plain English, and is honest about the parts that depend on where you live or how you use the cup.

What is polypropylene?

Polypropylene (PP) is a lightweight, tough thermoplastic used for food tubs, bottle caps, yoghurt pots, baby bottles and reusable drinkware. It's rigid enough to hold its shape, slightly flexible so it doesn't shatter, and it handles repeated washing well. Those are exactly the qualities a reusable cup needs.

For a busy bar, the practical difference is obvious the moment you pick one up. A polypropylene cup is light to carry and stack, it doesn't crack when it's dropped on concrete, and it doesn't go soft and flimsy in your hand the way a thin single-use cup can. Our reusable plastic cups are made from it for that reason.

What does PP5 mean?

PP5 is the resin identification code for polypropylene. You'll see it as a small triangle with the number 5 inside, often with "PP" underneath. The code tells recyclers which plastic they're handling. It isn't a safety rating, and it doesn't mean the item is made from recycled material.

Here's where polypropylene sits among the seven codes you'll find on plastic packaging and drinkware.

CodePlasticWhere you usually see it
1 PETPolyethylene terephthalateDrinks bottles and clear single-use cups
2 HDPEHigh-density polyethyleneMilk bottles, household containers
3 PVCPolyvinyl chloridePipes, window frames, some packaging
4 LDPELow-density polyethyleneBags, films and the lining of many paper cups
5 PPPolypropyleneReusable cups, food tubs, bottle caps, baby bottles
6 PSPolystyreneVending cups, foam food boxes
7 OtherEverything else, including polycarbonate and PLASome hard "glass-look" tumblers, compostable cups

Is polypropylene food safe?

Polypropylene is one of the standard plastics for food and drink contact. That's why you'll find it in your fridge as often as at a festival bar. What matters for any cup is the specific grade of material and how it's made, which is why we make ours from food-safe, BPA free polypropylene in our own factory rather than buying finished cups in.

There's one more detail people don't think to ask about: the print. On our printed cups the design is applied by In Mould Labelling (IML), which makes the label part of the outside wall of the cup. The inside, where your drink sits, is plain polypropylene. Nothing is painted onto the rim, and there's no surface ink to wear away into a drink.

Is polypropylene BPA free?

Yes. Polypropylene isn't made with BPA, so a polypropylene cup is BPA free by nature. BPA (bisphenol A) is a building block of polycarbonate, the hard, glass-clear plastic used for some "unbreakable" tumblers, and of some epoxy coatings. If a cup is marked PP or 5, it isn't polycarbonate.

Every cup we make is BPA free polypropylene, printed or plain. If you're comparing suppliers, it's worth asking what a cup is made from rather than just whether it's "plastic": polycarbonate, Tritan, PET and polypropylene all behave differently.

Can polypropylene cups take hot drinks?

Polypropylene handles heat better than thin single-use plastics, and a cup designed for hot drinks is the right tool for tea and coffee. Our Hot Drinks Cup is made from BPA free polypropylene with a ribbed grip, fill lines inside at 10oz, 12oz and 14oz, and room for our reusable lid or a standard-sized paper lid. It's the cup we'd send for Christmas markets, mulled wine, matchday tea bars and office coffee points.

Our pint, half pint, wine and cocktail cups are made for cold drinks: beer, cider, wine, cocktails and soft drinks. Here's a quick guide to what each part of the range is made for.

UseOur cups
Beer, cider, lagerPints, half pints, 2 Pints and Stack Cups™, UKCA certified as legal measures
Wine, fizz and cocktailsStackable Wine Cup (350ml), 16oz Cocktail Cup (400ml), Stack Flute
Tea, coffee, mulled wineHot Drinks Cup, with 10oz, 12oz and 14oz fill lines and a lid
Dishwasher and glasswasherEvery cup, built for 200+ commercial dishwasher cycles
MicrowaveNot part of our care guidance: heat the drink first, then pour

Are polypropylene cups dishwasher safe?

Ours are: every Drinksmate cup is dishwasher safe and built for 200+ commercial dishwasher cycles. That includes the printed cups. Because IML makes the design part of the cup wall, the print goes through the wash with the cup rather than sitting on the surface waiting to scratch or peel.

For events and venues washing in volume, the cup is only half the system. Collection points, crates, a validated wash process and proper drying all matter. If you'd rather not run that yourself, our cup rental and washing service takes it off your hands.

Is polypropylene recyclable?

Polypropylene is recyclable where facilities accept it. In the UK, that depends on your council and on the route the cup takes: some kerbside collections take PP pots and tubs, others don't, and commercial waste contracts vary again. We'd rather tell you that plainly than print "100% recyclable" on a page.

The bigger point is that recycling is the last step, not the first. A reusable cup earns its keep by being washed and refilled again and again, and that's where almost all of its benefit comes from. When one of our cups does reach the end of its service, it can come back to be reprocessed or be recycled where suitable facilities accept polypropylene. Our sustainability page sets out how we think about reuse, recovery and recycling.

StageWhat happensWhy it matters
ReuseCollected, washed and refilled, event after eventEach extra use replaces a single-use cup
KeepTaken home as a souvenir and used againA cup that stays in use isn't waste
RecycleAt the end of its service, where facilities accept polypropyleneThe last step, not the first

How does polypropylene compare with paper, PET and compostable cups?

Every material is a trade-off, and the honest answer depends on how many times a cup is used. A thin PET cup is light and clear but made for one drink. A paper cup usually has a plastic lining, which complicates recycling. A compostable PLA cup only breaks down properly in an industrial composting facility. A polypropylene reusable cup uses more material than any of them, which is exactly why it has to be reused to make sense.

We go into the detail in our guides to compostable vs reusable eco friendly cups and what eco cups are, and our eco cups page covers the range itself.

What should you check before buying polypropylene cups?

Not every "plastic cup" is the same, even when it's polypropylene. Before you order a few hundred or a few thousand, ask the supplier these questions:

  • What exactly is it made from? Look for food-safe, BPA free polypropylene, marked PP or 5.
  • Who makes it? A manufacturer can tell you about the material and the process; a reseller may only know the catalogue description.
  • How many washes is it built for? Ours are built for 200+ commercial dishwasher cycles.
  • Where is the print? IML makes the design part of the outside wall, so nothing printed sits on the rim or inside the cup.
  • Is it a legal measure? If you're serving beer or cider by the pint, the cup needs to be UKCA certified.
  • Is it made for hot drinks? Use a cup designed for tea and coffee, with fill lines and a lid.

Why we make our cups from polypropylene

We make every cup in Stockton-on-Tees, so we choose the material, set the wall thickness and check the finish ourselves. Polypropylene gives us a cup that's rigid in the hand, shatterproof on a hard floor, light enough to carry by the dozen and tough enough for 200+ commercial washes. It takes a full colour IML print that covers 95% of the cup, and it holds an accurate measure: our pint cups are UKCA certified as legal measures.

If you want plain cups for a bar that just needs reliable stock, our plain cups are dispatched in 3 working days. If you want your own design on them, send us your logo and we'll send a free digital proof before anything is made. For more on how long reusable cups last in real use, read our reusable plastic cups guide.

Frequently asked questions

Straight answers from the factory.

Still have questions? Get in touch with our team

Get in touch with our team
  1. Yes. Polypropylene (PP, resin code 5) is one of the most widely used plastics for food and drink contact, found in food storage tubs, yoghurt pots, bottle caps and baby bottles. Our reusable cups are made from food-safe, BPA free polypropylene at our factory in Stockton-on-Tees.

  2. Yes. BPA (bisphenol A) is a building block of polycarbonate and some epoxy resins. Polypropylene isn't made from it, so a polypropylene cup is BPA free by nature. Every Drinksmate cup is BPA free polypropylene.

  3. Yes, when the cup is designed for it. Our Hot Drinks Cup is made from BPA free polypropylene with a ribbed grip, fill lines at 10oz, 12oz and 14oz, and room for our reusable lid or a standard-sized paper lid, so it's built for tea, coffee and mulled wine.

  4. Ours are. Every Drinksmate cup is dishwasher safe and built for 200+ commercial dishwasher cycles, and the printed design is part of the cup wall, so it goes through the wash with the cup rather than sitting on the surface.

  5. PP5 is the resin identification code for polypropylene: the number 5 inside the recycling triangle, often with the letters PP underneath. It tells recyclers what the plastic is. It doesn't mean the item is recycled content or that every local service will collect it.

  6. Polypropylene is recyclable where facilities accept it, and acceptance varies by council and by collection route. That's why reuse comes first: a cup that's washed and refilled 200+ times does far more good than one that's recycled after a single drink.

  7. No. Our full colour and single colour designs are printed by In Mould Labelling (IML), which makes the label part of the outside wall of the cup. The inside of the cup is plain polypropylene, so your drink only touches the cup itself.

  8. Our cups are built for 200+ commercial dishwasher cycles. How long that lasts in practice depends on how often you use them and how they're handled, which is why a well-run collect, wash and refill system gets the most out of every cup.

Get a price for your reusable cups

Choose your cups, quantity and event date to see your price.

1. Build Your Order

Auto-Selected Tier

Select a date to calculate

Popular Festival Cups

Pint to Line (Full Colour)

Pint to Line (Full Colour)

From £0.55 ex VAT

Min: 50

2 PINT (Full Colour)

2 PINT (Full Colour)

From £0.80 ex VAT

Min: 50

Half Pint (Full Colour)

Half Pint (Full Colour)

From £0.43 ex VAT

Min: 50

2. Contact Information

3. Your Message

Set artwork (upload your files or add our design service) on each product above when you add it to your quote.